4.1.2.5 Alignment Menu
Rear Projection
Reverse the image horizontally when the setup is with the projector at the rear of the screen.
Off: Default value. Projector is in front projection mode. y
On: Projector is in rear projection mode. y
Ceiling Mode
Reverse the image vertically when the setup is with the projector which is mounted with a ceiling mount.
Off: Default value. Projector is in the table mode. y
On: Projector is in ceiling mode. y
Lens Control
Zoom: Lens zoom. y
Focus: Lens focus. y
Enter to shift: Each time enter is pressed it will go from zoom/focus to shift to zoom/focus. y
Left/Right: Lens shift left/right. y
UP/Down: Lens shift up/down. y
Enter to zoom/focus: Each time enter is pressed it will go from zoom/focus to shift to zoom/focus. y
Keystone
Adjust vertical keystone.
Gamma
Set gamma type.
Film: for home theater. y
Video: for video or TV source. y
Graphics: for image source. y
Standard: for PC or computer source. y
Internal Pattern
The projector comes with some standard built-in patterns for
testers to calibrate the equipment.
None y White y Grid y
Custom Color Space
Adjust the .x and .y values of the primary colors and white.
Red Weighting of Red y Green Weighting of Red y
Blue Weighting of Red y Green Weighting of Green y
Red Weighting of Green y Blue Weighting of Green y
Blue Weighting of Blue y Red Weighting of Blue y
Green Weighting of Blue y Red Weighting of White y
To Next Page
