4-4
Connections
5976135 BARCOSIM 6 21032000
SDI
SDO
S-VIDEO
VIDEO
COMPUTER
IEEE 1394
TRIG
M
MONITOR
R
GB H/CV
5
6
2
1
43
Select with ê or é
then <ENTER>
<EXIT> to return.
Select with ê or é
then <ENTER>
<EXIT> to return.
Which signals can be connected to the 5-cable input
The following signals can be connected to these BNC connectors :
Connector name R G B H V
Input signal
RGBHV R G B H V
RGBS R G B S -
RGsB R Gs B - -
Composite Video² - Video - - -
Super Video² -Y-- C
Component Video - SS² R-Y Y B-Y S -
Component Video - SOY² R-Y Ys B-Y - -
² These source are optional for the BARCOREALITY SIM6.
How to select input Slot 1
Key in 1 on the RCU or the local keypad.
Configuration of the 5-cable input
The configuration has to be done on the 'Input slot' menu.
To change the signal format :
1 Press ADJUST or ENTER key to start up the Adjustment mode (menu 1).
2 Push the cursor key é or ê to select
Installation
3 Press ENTER.
4 Press the cursor key é or ê to select 'Input Slots' (menu 2)
5 Press ENTER. The internal system will scan the inputs and displays the result in the 'Input Slots' menu.
6 Push the cursor key é or ê to select the first slot (menu 3).
7 Press ENTER key to toggle the input signal priority.
5-cable Input Slot (slot 1)
Slot 1 has 5 BNC input terminals.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
INSTALLATION
INPUT SLOTS
800 PERIPHIRAL
CONFIGURATION
OSD COLOR
INPUT SLOTS
SLOT SELECTOR [Automatic]
x 1. RGB [HS&VS]
- 2. RGB [HS&VS]
- 3. VIDEO
- 4. S-VIDEO
- 5. DIGITAL INPUT
- 6. IEEE 1394
Select with ê or é
then <ENTER>
<EXIT> to return.
menu 1 menu 2 menu 3
To Next Page
Loading...
