204 Barco - RHDM-2301 - User manual
Addendum
• Verify that the holes (see zoom in below) in the protective cover are visible. If not, turn the pro-
tective cover around. This is very important since they provide the space that is necessary to
accommodate the track ball and the rotary knobs of the control panel.
• Place the display unit in the plastic bag and seal the plastic bag.
• Place the display unit gently in the box. The LCD screen is facing down.
• Place the other protective cover on top. Verify that the protective cover is placed on the display
unit in exactly the same way as the first protective cover was placed in the box. Include all orig-
To Next Page
Loading...
