129R5911443 /03 UDM
2. To disable an IR sensor, select the slider and drag to the left.
A blue slider means an active IR sensor.
A gray slider means an inactive IR sensor.
3. Select APPLY and click OK to apply the changes.
10.3 Setting a custom projector name
What can be done?
The default name of the projector is “Pulse”. However, you can change this name to make it easier to spot in a
network with multiple devices or projectors
How to set a different Host name
1. In the main menu, select Settings → Communication → Host name.
Image 10–20 Settings menu, host name
The Host name menu is displayed.
Image 10–21 Example of the host name menu
2. Press confirm to edit the Host name field.
3. Use the digital keyboard to change the Hostname to the desired custom name.
4. Press the OK key, or press the enter icon to confirm the typed name. Click Apply to update the host name.
10.4 DMX
About the ways to control the projector via DMX
DMX signals can be connected to the DMX In port on the communicator interface when using a standard DMX
cable equipped with XLR connector. The DMX out can be used to create a chain of DMX devices. One
universe can control up to 512 channels.
GUI – System Settings
To Next Page
Loading...
