R5911443 /03 UDM70
Image 7–24 Example of the enabled digital zoom mode
4. If digital shift is enabled, you can now do the following:
• Use the ◄ or ► key to shift the lens (image) in horizontal direction.
• Use the ▲ or ▼ key to shift the lens (image) in vertical direction.
• Use the enter key to transform the keypad to digital zoom mode (if enabled).
• Use the return key to exit without saving.
5. If digital zoom is enabled, you can now do the following:
• Use the ◄ or ► key to zoom the lens in or out.
• Use the enter key to either finish digital shift and zoom.
• Use the return key to exit without saving.
7.6 RealColor P7
Purpose
When blending images from multiple projectors, the measured color coordination of each projector can be
altered to a desired common level. This so that the projected colors are identical over all projectors used.
Alternatively, if you are unfamiliar with how adjusting the Colors to a specific setting, there are also a certain
number of presets available, which forces the color output to specific color standards.
How to set custom P7 values
1. In the main menu, select Image → Advanced → RealColor P7.
Image 7–25 Advanced settings menu – RealColor P7
The P7 menu is displayed.
GUI – Image
To Next Page
Loading...
