137R5911443 /03 UDM
• Vertical lens shift
• Zoom
2. To enable/disable a feature, click on the slider and drag it to the left to disable the feature or the right to
enable the feature.
When enabled, the slider becomes blue; when disabled, the slider is gray.
10.12 Factory reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Factory settings
The following settings are the default factory settings:
Option
Setting Factory setting
DMX DMX Mode Basic
Start Channel 1
GSM
Illumination Power 100%
Image blend Blend/Mask size
Black Level
Disabled, all value to zero
Black Level Files
Blend Files
Disabled, all files deleted
Image connectors Color Space auto
Signal Range auto
Image convergence Electronic Convergence All values to zero
Image display Display mode AutoStereo
Image features Contrast mid value
Brightness mid value
Saturation mid value
Sharpness mid value
Gamma mid value
Cropping Off
Aspect Ratio 16:9
Scaling Fill Aspect ratio
Image Orientation Orientation Table, Front
Image RealColor P7 P7 Realcolor all set to native
Image Resolution Output Resolution (if applicable) 4K UHD
Image Source Source files Standard
Image 3D Sync delay 0 µs
Swap eye Off
GUI – System Settings
To Next Page
Loading...
