R5911443 /11 UDM160
10.14 Lens features
What can be done?
Some lens features can be disabled once they are correctly aligned so that a misalignment during a show is
not possible.
How to enable/disable
1. In the main menu, select Settings → Lens Features.
Image 10–54 Settings menu, Lens features
The Lens features menu is displayed.
Image 10–55 Example of the lens features menu
Depending on the mounted lens type, different functions may or may not be available such as:
• Horizontal lens shift
• Vertical lens shift
• Focus
• Zoom
2. To enable/disable a feature, click on the slider and drag it to the left to disable the feature or the right to
enable the feature.
When enabled, the slider becomes blue; when disabled, the slider is gray.
10.15 Factory reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Factory settings
The following settings are the default factory settings:
GUI – System Settings
To Next Page
Loading...
Need help?
General
