R5911443 /03 UDM94
Asymmetric bow correction
1. In the Bow menu, enable the Bow slider and disable the symmetric slider.
Image 8–42 Example of the bow menu, with the Symmetric slider disabled
There are now two vectors on each side of the picture that can be adjusted individually.
2. Use the arrow keys to select the helping lines that represent the picture and confirm.
The helping lines that represent the projected picture are now colored blue, while the others are colored
white.
Image 8–43
3. Select the desired slider and confirm.
Image 8–44
GUI – Installation
To Next Page
Loading...
