R5911443 /03 UDM80
Image 8–5 Example of the Lens menu
2. In the Lens menu, click Dynamic focus to toggle between On and Off.
Image 8–6 Lens menu,
Dynamic focus enabled
Image 8–7 Lens menu,
Dynamic focus disabled
Note: The Dynamic focus slider is only visible when the light source is on.
8.4 Configuring the lens, Shift to center
What can be done?
The lens can be forced back to the center position by selecting Shift to center.
How force lens in Mid position
1. To force lens in Mid position, select Installation → Lens → Shift to Center.
2. Confirm by selecting CONFIRM.
Image 8–8 Example of the Shift to center action
The lens will calibrate itself and return to the center position.
GUI – Installation
To Next Page
Loading...
