R5911443 /03 UDM148
If one or more laser banks have failed of a certain type, you will notice a decreased light input and decrease in
color performance. But the projector will keep on playing, unless too many banks of a certain color will have
failed.
In order to disable a certain laser bank, or calibrate the projector after disabling one or more laser
banks, please refer to the Projector Toolset User Manual.
How to check the status of the Laser Banks
1. In the main menu, navigate to Settings → Maintenance → Advanced, while using the service code to enter
the menu.
Image 10–61 Maintenance menu, Advanced
2. Enter the service code.
3. In the Service menu, select Laser Banks.
Image 10–62 Advanced menu, Laser banks
The Laser group statistics menu is displayed.
Image 10–63 Example of the Laser group statistics menu
4. Select the desired laser group.
5. In the laser banks group page, you can see which laser banks are part of this specific group. You can also
see which laser banks are operational and which have failed.
GUI – System Settings
To Next Page
Loading...
