Bard MC5000 Series User Manual

Manual 2100-746
Page 17 of 55
Humidification Interstage Differential
Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Humidification
ISD.
4. Press UP/DOWN arrow to scroll to Humidification
ISD Set Point Value.
5. Press Confirm button.
6. Press Home button.
Humidification Stage Off Differential
Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Hum Stage Off
Differential.
4. Press UP/DOWN arrow to scroll to Hum Stage Off
Differential Set Point Value.
5. Press Confirm button.
6. Press Home button.
High Humidity Alarm Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High Humidity
Alarm Set Point.
4. Press UP/DOWN arrow to scroll to High Humidity
Alarm Set Point Value.
5. Press Confirm button.
6. Press Home button.
Low Humidity Alarm Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Low Humidity
Alarm Set Point.
4. Press UP/DOWN arrow to scroll to Low Humidity
Alarm Set Point Value.
5. Press Confirm button.
6. Press Home button.
Low Temperature Alarm Level Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Low Temperature
Alarm Level.
4. Press UP/DOWN arrow to scroll to Low Temperature
Alarm Level Set Point Value.
5. Press Confirm button.
6. Press Home button.
High Temperature Alarm Level 1 Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level 1.
4. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level Set Point Value.
5. Press Confirm button.
6. Press Home button.
High Temperature Alarm Level 2 Set
Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level 2.
4. Press UP/DOWN arrow to scroll to High
Temperature Alarm Level Set Point Value.
5. Press Confirm button.
6. Press Home button.
Heat Pump Lockout Range Set Points
1. Press Menu button on Home screen.
2. Press Set Points button.
3. Press UP/DOWN arrow to scroll to Heat Pump
Lockout Range.
4. Press UP/DOWN buttons to scroll to Heat Pump
Lockout Range Set Point Value.
5. Press Confirm button.
6. Press Home button.

Bard MC5000 Series Specifications

General

Brand	Bard
Model	MC5000 Series
Category	Controller
Language	English