2100-444-003A
Page 27
Enables
Each of these screens has up to 32 lines of data in it. Study the Keypad Map in section 5.4 to
become familiar with the menu tree structure. This is a handy reference and includes all keystrokes
needed to get to any display or function.
Pressing the <Right > key once from the Building Status screen will take you to the next screen,
the Unit Status screen . The screen name will be displayed on the second line. Use the right and left
arrows to scroll back and forth through the seven screens.
From this display press the <Down> key to scroll down the screen information.
Not all items in every screen are available to every user to change. Some screens are password
protected. If your password gives you the required authority level, you will be able to access the screenu
to make changes. See the Password section for a discussion of the authority levels.
5.3.1 Buildings Status Screen
Authority Level Required to Make Changes - Does not apply. No changes can be made from this screen.
The Building Status screen displays the following information about the shelter environment.
Room Temperature Value DegF
Room Humidity Value RH
Outdoor Temperature Value DegF
Outdoor Humidity Value RH
Active Cooling Setpoint Value DegF
Active Heating Setpoint Value DegF
Free Cooling YES/NO
Shelter Power UTIL/BAT
Room Occupied YES/NO
Outdoor Enthalpy Value Btu/Lb
Pressing the <Up> or <Down> key will scroll up or
UNIT STATUS
12/01/03 8:45 AM
NO ALARMS
BUILDING STATUS
ROOM TEMP. 75.59F
ROOM RH 39.4RH
OD TEMP. 73.11F
OUTDOOR RH 40.9RH
ACTIVE CLG.SP 80.00F
ACTIVE HTG.SP 68.00F
FREE COOLING NO
LEAD UNIT 2
SHELTER POWER UTIL
ROOM OCCUPIED NO
OD ENTHALPY 25.44
To Next Page
Loading...
Need help?
General
