Safety advice
3.4 Electromagnetic properties / safety distances
3.4.1 Electromagnetic emission
Guidelines and manufacturers declaration - Electromagnetic emission
The Barkey plasmatherm is intended for operation in one of the environments listed below.
The customer or user of the Barkey plasmatherm must ensure that it is operated in one of these
environments.
Radiated EMI measurements
Electromagnetic environment -
guidelines
HF outputs in accordance with
CISPR 11
The Barkey plasmatherm uses
high-frequency energy for inter-
nal functions only. This means
that HF emission is very low, and
neighbouring electronic devices
are unlikely to be affected.
HF outputs in accordance with
CISPR 11
The Barkey plasmatherm is suit-
able for use in buildings other
than residential and those which
are directly connected to a public
supply network which is also
used to supply buildings used for
residential purposes.
Harmonic output in accordance
with IEC 61000-3-2
Emission of voltage fluctuations/
flicker according to IEC 61000-3-3
To Next Page
Loading...
