Barkey plasmatherm - Paddle Blocked; Tank Is Empty

Error messages
7.3 Paddle blocked
If the paddle for the special "Undulation" function is blocked, the following error mes-
sage is displayed:
► Note the error message.
► Make a note of the error number (098)
and serial number (SN).
► Switch off the device.
Figure 41: "Paddle blocked!" error message
7.4 Tank is empty
If the tank is empty or if the level in the tank has fallen below a critical level for the heat-
ing, the following error message is displayed:
► Note the error message.
► Switch off the device.
► Top up with water as described in the
Chapter Filling with water.
Figure 42: "Tank is empty!" error message
! E r r o r!
P a d d l e b l o ck e d !
E r r o r n u m b er : 0 9 8
S N : 1 2 3 45 6 7
S w i t c h o f f t h e
device
! E r r o r!
T a n k i s em p t y !
E r r o r n u m b er : 1 0 0
S N : 1 2 3 45 6 7
S w i t c h o f f t h e
device