Bartec USA TPMS PRO Series User Guide Rev5.1 Table of Contents
Page 54
B - VIN
When using the PRO Series tool, it is important to verify the Model Year you are working on to ensure that you are looking for
the proper sensor and are using the proper vehicle COMs when necessary.
By using the vehicle’s VIN instead of the manufacture date, you can accurately determine that vehicle’s Model Year. Refer to
that vehicle’s VIN, and locate the 10
th
digit from the left. Use the 10
th
digit to reference the chart below to determine the correct
Model Year. The VIN is most commonly located at the base of the windshield on the driver’s side, or on the tire placard in the
driver’s-side door jamb as per the diagram below.
To Next Page
Loading...
Need help?
General