Bartec Syscom MR3000 Series User Manual

20
2.4.12. Axis orientation
The axis orientation of the MR3000SB depends if the installation is vertical (against a wall) or
horizontal (on the ground). In the Figure 2.4.12 the different configurations are shown.
2.4.13. Installation
For a fixed installation of the SB, it is possible to directly fix the SB or to use a mounting plate.
In the first case, the holes (number 1 in the Figures 2.4.13 and 2.4.14) close to the screws (number
2 in the same figures) can be used. The screws are used to fix the cover to the box containing all
the electronics of the SB.
Figure 2.4.13. Cover part of the SB, from an internal point of view.
Figure 2.4.14. Internal view of the SB.
2
1
1
2

Bartec Syscom MR3000 Series Specifications

General

Brand	Bartec
Model	Syscom MR3000 Series
Category	Measuring Instruments
Language	English