52
In Push mode the SB will push a new event file to the FTP server as soon as recording of
the file is done. The current background file may be updated continuously on the FTP
server. In User parameters > Advanced settings – see chapter 5.4.8 - you specify how
often the current background file is updated on the FTP server.
Preserve SD-Card hierarchy means that you have the same directory structure on the FTP
server as in the SB ../events/2014/01/09/ - year, month, day and /background/2014/01 –
year month. If this option is not checked, the files are copied to the directories /events and
/background.
In Backup mode the SB will keep the FTP server synchronized with its data. At each
connection, the SB will compare its own data to the FTP data, and any missing file on the
FTP will be copied. This option can be combined with the Push mode. It checks the integrity
of the data on the FTP server in scheduled time intervals.
Backup mode always maintains the hierarchy on the SD-Card. If you have not checked this
option above and both, Push mode and Backup mode are enabled, you will have two
copies of the same file on your FTP server – of course this also doubles the amount of data
sent to the FTP server.
Figure 5.3.7. Subsection dedicated to the FTP.
NOTE: The name of the main directory for a specific SB (main-dir/events/2014/…) is what you have
set-up as Sub directory Name of the SB. If you change this setting, the SB will generate a new
directory on the FTP server.
To Next Page
Loading...
Need help?
General
