Bartell SP8 - Specifications

SURFACE PREPARATION SYSTEM OWNER’S MANUAL & PARTS BOOK
BARTELL MORRISON INC. BARTELL MORRISON (USA) LLC
375 ANNAGEM BLVD, MISSISSAUGA, ONTARIO, CANADA, L5T 3A7, 905-364-4200 FAX 905-364-4201
25 INDUSTRIAL DRIVE, KEYPORT, NEW JERSEY, USA, 07735, 732-566-5400 FAX 732-566-5444
- 30 -
USPECIFICATIONS
USURFACE PREPARATION SYSTEM
SP8 – Walk behind surface grinder/scarifier with a cutting width up to 8” (203 mm)
SP8-A SP8-G SP8-E
Model Power Supply
Operating
Weight
(approx.)
Shipping
Weight
Standard
Cutting Width
Working
Depth
(per pass)
SP8-G
6 HP OHV
Robin
5.5 HP OHV
Honda
135 lbs.
61 kg
150 lbs.
68 kg
up to 8”
(203 mm)
up to 1/16”
(1.6 mm)
SP8-E
2 HP 110/220V
Leeson Motor
3 HP 220V
Leeson Motor
150 lbs.
68 kg
165 lbs.
75 kg
up to 8”
(203 mm)
up to 1/16”
(1.6 mm)
SP8-A
5 HP Gast 8
90 CFM at 90 PSI
135 lbs.
61 kg
150 lbs.
68 kg
up to 8”
(203 mm)
up to 1/16”
(1.6 mm)