AW00118702000 Revision History
Basler racer Camera Link 39
Revision History
Doc. ID Number Date Changes
AW00118701000 17 Sep 2012 Initial release of this document. Applies to prototype cameras only.
AW00118702000 1 Feb 2013 Initial release of this document applying to series-production status.
Updated the e-mail addresses for Basler technical support.
Added descriptions of the 1X tap geometry throughout the document.
Updated the camera’s back view in Fig. 1 on page 1.
Modified the specification for camera power in Table 2.
Corrected the AOI width increments in Section 2.3 on page 26.