EasyManua.ls Logo

Batavus VA User Manual

Batavus VA
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Application
This workshop manual applies to Batavus VA and HS 50
moped with Laura engine
M
48.
Foreword
This manual is meant in the first place to assist those,
who have to maintain and repair these mopeds, to carry
out their work in an expert and time saving manner and
to make them familiar with them.
Undoubtedly some problems will arise in practice, which
have not dealt with in this manual.
In case you might not be able to overcome them, our
Service Department is fully at your disposal to assist you
in every possible way.
Index
Technical data engine
Technical data frame
Tools
Cylinder and cylinderhead
Piston
Clutch
Ignition
Carburettor and Intake silencer
Reed valve
Crankcase and seals
Crankshaft and bearings
Dirt shield, sparkplug and fuel
Trouble shooting
Crankaxle dis- and reassembly
Engine removal
Swingarm and Centerstand
Various
Steering lock
Frontfork
Wheels
Silencer
Electrical equipment
Electrical diagram 29/5 W
Electrical diagram
22/10/5
W
Important notice
Only original BATAVUS and LAURA parts guarantee
ultimate safety and protection against needless damage.
Warranty claims will not be accepted when assembly or
use of imitation replacement parts are established.
page 2
page 2
page 3
page 4
page 5
page 6- 7
page 8- 9
page
10-11
page 12
page 13
page 14
page 15
page
16-17
page 18-19
page 20-21
page 22-23
page 24
page 25
page 26-27
page 28
page 29
page 30
page 31
page 32
1
Question and Answer IconNeed help?

Do you have a question about the Batavus VA and is the answer not in the manual?

Batavus VA Specifications

General IconGeneral
Engine type2-stroke
FrameSteel
Front SuspensionTelescopic fork
Fuel SystemCarburetor
Rear SuspensionSwingarm
Front BrakeDrum
Rear BrakeDrum

Summary

Technical data engine

Technical data frame

Tools

Cylinder and cylinderhead

Piston

Clutch

Clutch Construction and Operation

Details on the clutch's mechanical build and how it functions during operation.

Clutch Housing and Bearings

Information regarding the clutch housing, needle bearings, and associated seals.

Ignition 6 V - 29/5 W.

Ignition 6 V - 22/10/5 W.

Carburettor

Intake silencer

Reed valve

Crankcase

Crankshaft

Dirt shield

Spark plug

Fuel

Trouble shooting

Engine starting issues

Diagnosing problems with engine starting or initial running.

Engine stopping issues

Troubleshooting why the engine stops shortly after starting.

Idling speed issues

Addressing problems related to incorrect idling speed.

Performance and speed issues

Resolving issues with poor performance or uncontrolled speed.

Clutch disengagement issues

Fixing clutch problems that prevent proper disengagement.

Crankaxle dis- and reassembly

Chain and left side crank removal

Procedures for removing the transmission chain and left side crank.

Crankaxle and pulley assembly

Steps for disassembling and reassembling the crankaxle and pulley.

Engine removal

Component disconnection for removal

Steps for disconnecting engine components before removal.

Engine support and wiring management

Handling engine support brackets and electrical connections during removal.

Swingarm dis- and reassembly

Swingarm disassembly and reassembly

Guide to taking apart and putting back together the swingarm assembly.

Centerstand installation

Instructions for attaching the centerstand to the rearfork.

Various

Rearfork components

Details on chain tensioner and crankaxle bearings on the rearfork.

Steering lock

Fuel tap

Frontfork

Frontfork and bearing replacement

Procedures for replacing frontfork legs and ballhead bearings.

Wheels

Wheel spoke and bearing details

Information on spoke lengths, hub bearings, and brakeshoe condition.

Silencer

Electrical equipment

Turn signal kit troubles

Troubleshooting common issues with the turn signal system.

Related product manuals