To Next PageTo Next PageWhy is my battioni Pagani Water Pump beating against an external surface?
If your battioni Pagani Water Pump is beating against an external surface, it could be due to a rate of revs that is too low; try increasing the rate of revs. Alternatively, the lubrication oil might be excessive, short, and/or not suitable, in which case you should clean the rotary blades pump and replace the oil.
Why is there no circulation of lubricating oil in my battioni Pagani Water Pump?
If there's no circulation of lubricating oil in your battioni Pagani Water Pump (for versions with automatic lubrication), it could be due to air intake at the pipe fittings; in this case, replace the pipe fittings. It's also possible that the lubrication tube is badly inserted in the pipe fittings; make sure to insert the lubrication tube correctly. Another cause could be air in the oil pump chamber; if so, fill the pump chamber with oil.
Why does sewage come out of the discharge elbow of my battioni Pagani Water Pump?
If sewage is coming out of the discharge elbow of your battioni Pagani Water Pump, check the valves.
What to do if blades are jammed in the rotor of my battioni Pagani Water Pump?
If some blades are jammed in the rotor of your battioni Pagani Water Pump, disassemble the rotary blades vacuum pump, then clean and wash the rotor, blades, and body.
How to fix worn blades on a battioni Pagani Water Pump?
To fix worn blades on your battioni Pagani Water Pump, replace the blades.
What to do if there is air infiltration or leakage from the battioni Pagani Water Pump system?
If there is air infiltration or leakage from the battioni Pagani Water Pump system, eliminate the infiltrations.
General| Brand | battioni Pagani |
|---|---|
| Model | STAR 72 |
| Category | Water Pump |
| Language | English |
