15
Setting the start and end time function
This function will allow you to set a time in the future that the will
oven switch on at and a time that the oven will switch off at.
o Press the oven ON/OFF button (6).
o Select an oven function by using the oven function selection
buttons (7).
o Once the display shows the oven function that you require, press
the confirmation button (8) to confirm your choice.
o Each oven function has a preset temperature assigned to it;
however it is possible to adjust this preset temperature using the
oven function thermostat buttons (1).
o Use the programmed cooking time selection buttons (3) to set
the length of time that you want the oven to cook for.
o The timer will initially count in minutes and seconds, and then if
you continue to increase the cooking time, it will then count in
hours and minutes. The maximum cooking time that can be set
is 10 hours.
o Immediately press the oven setting selection buttons (9) until
END OF COOKING appears on the display, press the confirmation
button (8) to confirm your choice.
o When the message SET TIME appears on the display, use the
programmed cooking time selection buttons (3) to set the time
of day that you want the oven to switch off at. Press the
confirmation button (8) to confirm your choice.
o A message will appear on the display every 15 seconds, showing
the time remaining until the oven switches on.
o If you want to delete the programmed cooking time, press the
programmed cooking time selection buttons (3) simultaneously.
o When the countdown is complete, the oven will emit an acoustic
signal for 5 minutes and show COOKING FINISHED on the
display.
o Press the oven ON/OFF button (6) to cancel the audible signal
and switch the oven off.
To Next Page
Loading...
