Baumer BMSV 58 - Product Classification

Manual_PROFINET_EN.doc 4/24 www.baumer.com
17.10.11
1.2. Product classification
Shaft encoders
Product Product family Suitable input in hardware-catalog
BMSV 58 MAGRES - Singleturn GCAMW
BMMV 58 MAGRES - Multiturn GCMMW
GBAMW multivoPlus - Singleturn GBAMW
GBLMW multivoPlus - Multiturn GBMMW
GBMMW multivoPlus - Multiturn GBMMW
GCAMW magtivo
®
- Singleturn GCAMW
GCMMW magtivo
®
- Multiturn GCMMW
GEMMW multivo
®
- Multiturn (stainless steel) GXMMW
GXAMW multivo
®
- Singleturn GXAMW
GXLMW multivo
®
- Multiturn GXMMW
GXMMW multivo
®
- Multiturn GXMMW
End shaft encoders
Product Product family Passender Eintrag im Hardware-Katalog
BMSH 58 MAGRES - Singleturn GCAMW
BMMH 58 MAGRES - Multiturn GCMMW
GBAMS multivoPlus - Singleturn GBAMW
GBLMS multivoPlus - Multiturn GBMMW
GBMMS multivoPlus - Multiturn GBMMW
GCAMS magtivo
®
- Singleturn GCAMW
GCMMS magtivo
®
- Multiturn GCMMW
GXAMS multivo
®
- Singleturn GXAMW
GXLMS multivo
®
- Multiturn GXMMW
GXMMS multivo
®
- Multiturn GXMMW
Hollow shaft encoder
Product Product family Passender Eintrag im Hardware-Katalog
G0AMH multivo
®
- Singleturn GXAMW
G0LMH multivo
®
- Multiturn GXMMW
G0MMH multivo
®
- Multiturn GXMMW
GBAMH multivoPlus - Singleturn GBAMW
GBLMH multivoPlus - Multiturn GBMMW
GBMMH multivoPlus - Multiturn GBMMW
GSDML-File
The GSDML-File is the same for all products mentioned above.
GSDML-V2.2-Baumer_IVO-GXMMW_PN-20100212.xml
Supported Profile Version number (above: V2.2) and GSDML revision date (above: 20100212) in the GSDML
file in line with GSDML specifications serve only as an example and as a result of any product enhancement
may differ from downloaded file names or file names provided on the data carrier.