Baumer GK410 User Manual

Baumer IVO GmbH & Co. KG
Dauchinger Strasse 58-62
DE-78056 Villingen-Schwenningen
Phone +49 7720 942-0
Fax +49 7720 942-900 11.19 · 174.02.024/9
info.de@baumerivo.com Subject to modification in technic and design.
www.baumer.com Errors and omissions excepted.
Manual
Absolute Encoder Profibus-DPV0
(with bus cover and SSI coupler)
Firmware version from 1.20

Baumer GK410 Specifications

General

GigE Ports	1
Camera Link Ports	1
Power Supply	12-24 V DC
Camera Link Configuration	Base, Medium, Full
Operating Temperature	0...+50 °C
Storage Temperature	-20°C to +70°C
Function	Camera Link to GigE Vision converter
Humidity	95%, non-condensing

Summary

2. Safety and operating instructions

Mounting

Instructions for mounting solid and hollow shaft encoders, including coupling and clamping ring details.

Electrical commissioning

Guidelines for electrical connections, EMC/EMI requirements, shielding, and protective earth.

5. Encoder operating parameters

6. Data exchange between Profibus-DP devices

6.2. Initialization, restarting and user data communication

7. Parameterization and configuration

7.1. Parameterization

7.2. Configuration

8. Diagnostic signals

8.1. Description of the diagnosis data Slave_Diag

8.2. Parameter values of the diagnosis data Slave_Diag

8.4. Preset function

Details the preset function for setting a specific position value, its requirements, and the transmission method.

9. Entering parameters

10. Terminal assignment and commissioning

10.1. Mechanical mounting

Provides detailed instructions for mounting different encoder types (shaft, end shaft, hollow shaft).

10.2. Electrical connection

Outlines procedures for connecting the bus cover and the encoder itself.

10.2.1. Setting the user address

10.2.2. Terminating resistor

10.2.3. Bus cover connection

10.2.4. Terminal assignment

Details the pin assignments for M12 connectors and standard connectors for serial data and supply voltage.

10.3. Display element (status display)