Operating Instructions
Level measurement
CleverLevel
®
LBFS
Point level detection
LBFS with the following process connections:
G 1/2 A ISO 228-1 BSC (BCID G07) with
industrial weld-in sleeve for universal use, Ø 30 x
26 (ZPW1-711, ZPW1-721)
G 1/2 A hygienic (BCID A03) with weld-in sleeve
or adapter from Baumer
For these process connections, do not seal with
Teon tape (PTFE) or elastomer.
9 Vessel and pipelines are free of media.
9 Adapter or weld-in sleeve are mounted free of
dead space.
f
Screw in sensor.
Tightening torque: 15…20 Nm
2
LBFS with the following process connections:
G 1/2 A DIN 3852-E (BCID G51)
9 Vessel and pipelines are free of media.
f
Push the sealing ring on.
f
Screw in sensor.
Tightening torque: 15…20 Nm
2
LBFS with the following process connections:
G 1/2 A ISO 228-1 for internal installation (BCID
T10)
9 Vessel and pipelines are free of media.
f
Push the sealing ring on.
f
Screw in sensor.
Tightening torque: 15…20 Nm
6 / 48
www.baumer.com
To Next Page
Loading...
