Code: IU.01.09.0045
Version/Revision: 2.000
Page: 32 - 55
Drying cabinet
Model: EA-34-03
“rES”- Cooling time: 5 min;
“SP-t”- Cycle temperature: 80 ºC.
These values can be changed.
The cycle must not be started with the door open.
Loads and handling accessories must be handled by people using appropriate PPE to prevent
burns and exposure to process residues at the end of the cycle.
The safety routine carried out after a cycle is canceled is different for each type of process, so it
can be faster or longer.
Do not cancel the cycle by turning off the “on/off” switch, as the safety routine will not be carried
out, which could expose the user to process residues.
Do not turn off the equipment until the safety routine is completed.
The cycle must not be started with the door open.
9. Maintenance
The maintenance procedure for any equipment is vitally important to guarantee the quality of the process and
the longevity of the product and must be considered by the institution as an economic factor, as well as the
acquisition and use of the equipment.
Maintenance Concept
These are all the actions necessary to keep equipment or system in operation or to restore it to operation.
Maintenance includes maintenance, repair, modification, overhaul, inspection and determination of work
efficiency.
In Baumer SA products, at least two types of maintenance must be foreseen: corrective and preventive
maintenance.
The execution of all preventive maintenance presented in the equipment's LogBook is an essential condition for
maintaining the limited warranty offered to the original purchaser by Baumer SA
Baumer SA's network of representatives is able to offer exclusive preventive maintenance programs to our
customers under special conditions.
The appliance must be disconnected from the electrical current before starting any repair or
maintenance.
Maintenance and repair must be carried out by specially trained technicians.
Weekly:
• Cleaning internal and external surfaces.
• Check the integrity of the door trim.
• Check the cleanliness of the pre-filter on the top of the equipment.
To Next Page
Loading...