EasyManua.ls Logo

Baumer EA-34-03 - Introduction; Product Presentation; Security Notes; Warnings, Cautions and Symbols

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Use instruction
Drying cabinet
Model: EA-34-03
1. Introduction
The information contained in this manual is intended to allow the user to understand and properly operate this
product.
Regarding maintenance services, the information contained in this manual aims to describe less complex and
conservation procedures that are mandatory for users, and identify possible problems that must be referred for
assistance by technicians accredited by Baumer SA
Intervention by non-accredited personnel results in the expiration of the warranty for products still within the
validity period of this warranty for the equipment or parts thereof, and IN THE MANUFACTURER'S
RESPONSIBILITY SECTION for equipment outside these deadlines.
2. Product presentation
The Drying Cabinets are the result of technology developed by Baumer SA in the construction of equipment for
sterilizing medical devices and materials used in patient care in healthcare establishments and for devices and
materials used in laboratories and industries.
Drying equipment for post-washing use of tubes, hoses, metal instruments, anesthetic/ventilatory accessories,
glass, rubber, etc.
Capacity to hold up to 48 tracheas.
Internal width (mm)
595
Internal depth (mm)
615
Internal height (mm)
1415
Volume (l)
518
Mass (kg)
250
3. Warnings, cautions and symbols
The safety symbols are listed below and serve as guidance.
Danger Failure to follow the procedures recommended in this warning could lead to serious
injuries and considerable property damage.
Attention Failure to follow the procedures recommended in this notice may lead to equipment
malfunction or material damage.
Note The text aims to provide important information for the correct understanding and proper
functioning of the equipment.
3.1. Security Notes
The instructions in the manual are intended to reduce the risk of accidents for users of the equipment, as well
as to avoid interpretations that compromise the safety of the device, due to incorrect maintenance. To do this,
operators and/or maintenance teams must follow this manual to use the equipment.
The electrical panel marked with the “Electricity identification” label must not be opened by
unqualified personnel as there is a risk of electric shock.

Table of Contents