TAM 00699 34
DSD2 045 – 132 04/2018
Three-phase synchronous motor English
Warranty and liability
All the details in this documentation are non-binding customer information and subject to on going
change and will be constantly updated by our editing staff. Warranty and liability claims against
Baumüller Nürnberg GmbH are excluded if, in particular, damage is caused by one or more of the
following:
- You have not followed the instructions in this documentation.
- You have not used the system for the purpose intended.
- You have
installed, connected, started or operated the machine incorrectly or have not
maintained it.
permitted the system to be mounted, connected, commissioned, operated, and/or
maintained by unqualified or insufficiently qualified personnel.
overloaded the system.
operated the system with
o faulty safety devices,
o safety devices that were incorrectly fitted or not fitted,
o safety devices or protective devices that are not in working order.
not operated the system in the stipulated ambient conditions.
- You have modified the system without the written approval of Baumüller Nürnberg GmbH.
- You have not observed the instructions concerning maintenance in the component descriptions.
- You have not monitored parts that are subject to wear sufficiently.
- You have performed a repair incorrectly.
- You have combined the system with products from other manufacturers in an improper manner.
- You have combined the drive system with faulty and/or incorrectly documented products from
another manufacturer.
The latest version of the General Terms and Conditions of Sale of Baumüller Nürnberg GmbH always apply.
These will be made available to you at the latest on conclusion of the contract.
To Previous Page
Loading...
Need help?
General
