Baumuller DSD2 Series User Manual

TAM 00699 8
DSD2 045 – 132 04/2018
Three-phase synchronous motor English
2.4 Technical Data
Designs (EN 60034-7) IM B5 Horizontal installation position
IM V1 Vertical installation position, shaft end down
IM V3 Vertical installation position, shaft end up
Note: For installation according to IM V3 combined with IP 64 ensure protection against the
ingress of water and dirt.
IM B35 Horizontal mounting position of size 132
Note: The mounting positions IM V1 und IM V3 are not available for size 132.
Degree of protection (EN 60034-5) with consideration, of the shaft duct
IP 64 Standard: without shaft sealing ring
(size 45-100)
IP 65 Optional: with shaft sealing ring
(size 45-100)
IP 54 size 132
without consideration of the shaft duct
IP 67 for models with self-cooling (IC 410 and
IC 3W7); not for motors with terminal box
(size 45-100)
IP 65 for model with surface-cooling (IC 416)
(size 45-100)
IP 65 for model with terminal box
(size 45-100)
IP 54 size 132
Caution: All specified protection classes are only achieved in the event of completely
assembled plug connectors (mains and control connections) and fully closed terminal
box.
Cooling method (EN 60034-6) IC 410 Standard:
completely enclosed motor design,
surface-cooled, no fan, size 45-100
IC 416 Optional: from shaft height 56
completely enclosed motor design,
surface-cooled with fan,
IC 3W7 Optional available as of size 56
completely enclosed motor design,
water-cooled,
Electrical connections (see Appendix 1) via angled (3x90°) rotatable mounting boxes.
Caution: In the event of idling currents I
0
> 36 A the mains connection is via terminal boxes
Main connection 8-pin connector / Terminal box
Standard: U V W + thermal sensor
Optional: brake
Control connection 12-pin Standard: Resolver
12 / 17-pin Option: absolute encoder
Option: encoder + thermal sensor
12-pin Option: Hiperface-port
17-pin Option: Endat 2.1 port
9-pin Option: Endat 2.2 port
Fan (as an option) 6-pin plug or terminal box
Thermal motor protection (EN 60034-11) Temperature sensor PT1000, KTY84 in stator winding

Baumuller DSD2 Series Specifications

General

Brand	Baumuller
Model	DSD2 Series
Category	Engine
Language	English