TAM 00699 4
DSD2 045 – 132 04/2018
Three-phase synchronous motor English
1 General safety instructions
1.1 Safety
This electric motor has been constructed in accordance with the relevant safety standards and underwent
an operational safety check before leaving our factory.
To make sure that the machine is commissioned correctly and used safely, please read the following:
The Commissioning and Maintenance Instructions and their attached appendices
• The safety and commissioning notes
• The technical documentation that accompanies the product
• The commissioning and safety notes provided by the manufacturer of the converter
• The national, local, and system-specific regulations concerning your finished product
• The technical instruction of TAM 00697 for use in safety-oriented applications
We draw your attention to the following hazards when using the product:
Hazards resulting from • Lifting and transport
• Electrical power
• Moving parts
• Hot surfaces
• EMC interference
• Mechanical overload
• Thermal overload
Please, read all the safety instructions and in particular those which are marked with a symbol to avoid
injury to people and damage to property and to minimize residual risks,.
Risk of fatality due to electric shock
Failure to observe can lead to fatal or serious injuries.
General dangers warning
Failure to observe can lead to serious injury.
Dangerous situation warning
Failure to observe can lead to damage to the system or peripheral equipment.
Touching prohibited
Failure to observe can lead to serious injury.
Improper handling prohibited
Failure to observe can lead to serious injury
Magetic field warning.
Failure to observe can lead to severe injuries or damage to property.
Electrostatically sensitive components
Failure to observe can lead to damage to the system or peripheral equipment.
To Next Page
Loading...
Need help?
General
