Setting Up the Other Components
SETTING UP THE PREPSTATION CART
M00205 v1.1 Page 10
5. Connect the cable to the
camera. Position the camera
and stand in the hood.
6. Connect the footpedal
(optional) to the touchscreen.
Position the footpedal where
desired.
7. Optional: Connect the power
cord to the scale, then
connect the USB cable from
the scale to the touchscreen.
Refer to the installation
instructions for the scale.
8. Connect the ethernet cable
from the wall outlet to the
touchscreen.
To Next Page
Loading...
Need help?
General
