Do you have a question about the baxter prismaflex HP-X and is the answer not in the manual?
Brand | Baxter |
---|---|
Model | Prismaflex HP-X |
Pump Types | Blood Pump, Heparin Pump, Replacement Fluid Pump, Dialysate Pump, Effluent Pump |
Display | Touchscreen |
Power Requirements | 100-240 VAC, 50/60 Hz |
Storage Temperature | -20°C |
Connectivity | Ethernet, USB |
Blood Pump Flow Rate | 10-450 mL/min |
Blood Flow Rate | 10-450 mL/min |
Relative Humidity | 30-80% non-condensing |
Alarms | Comprehensive alarm system for pressure, flow, temperature, air detection, blood leak detection, and fluid balance deviations |
Details product features, intended use, and medical indications.
Critical safety advice, hazards, and precautions for product use.
Steps for preparing, connecting, and priming the set.
Procedures for managing blood leaks and allergic reactions.