What to do if the baxter TruSystem 7000 operating table does not respond when pushing a key and the battery status indicator flashes?
If the operating table is not responding and the battery status indicator is flashing, the operating table may be discharged. Operate the operating table with mains power supply and recharge the column batteries.
Why is my baxter TruSystem 7000 Medical Equipment operating table not working when I press a key?
If there is no function when pressing a key, the operating table might not be switched on. Press the power key on the column keypad.
What to do if the baxter Medical Equipment operating table cannot be switched on?
If the operating table cannot be switched on, it may be discharged. Operate the operating table with mains power supply and recharge the column batteries.
What to do if the baxter Medical Equipment tilt position cannot be fully attained?
If the tilt position cannot be fully attained, the (reverse) Trendelenburg angle setting may be too high. Reduce the (reverse) Trendelenburg setting.
What to do if the baxter Medical Equipment (Reverse) Trendelenburg position cannot be fully attained?
If the (Reverse) Trendelenburg position cannot be fully attained, the tilt angle setting may be too high. Reduce the tilt.
What to do if baxter TruSystem 7000 Medical Equipment leg sections cannot be adjusted far enough down?
If the leg sections cannot be adjusted far enough down, the longitudinal travel may be too far toward the head end. Adjust longitudinal travel toward the foot end.
What to do if the baxter TruSystem 7000 Medical Equipment back section cannot be adjusted far enough down?
If the back section cannot be adjusted far enough down, the longitudinal travel may be too far toward the foot end. Adjust longitudinal travel toward the head end.
What to do if the baxter Medical Equipment drive mode does not operate with the wired remote control?
If the operating table drive mode does not operate with the wired remote control, a power cable may be connected to the operating table. Disconnect the operating table from the line power.
Why is there no response when using the column keypad on my baxter TruSystem 7000 Medical Equipment?
If there is no response when using the column keypad, the key lock might be active. Release the keypad or use a two-key control by pressing the ON button and simultaneously pressing the desired function on the column keypad.
Why tilt cannot be adjusted when the baxter TruSystem 7000 Medical Equipment operating table is unlocked?
For safety reasons, when the operating table is unlocked, only the functions for driving mode are active; all other operating table functions are locked. Lock operating table.
Defines the intended use and critical restrictions for the operating table.
Specifies patient suitability and operator qualifications for safe use.
Outlines temperature, humidity, and pressure for operation and storage.
States the expected operational lifespan of the product.
Covers safe use with other products and user duties for safety.
Details safety measures for using HF equipment and defibrillators.
Guides users on responding to malfunctions and using emergency modes.
Explains the meaning of warning signs and labels on the product.
Introduces the two-part and one-part tabletop configurations and key parts.
Describes the column keypad and remote control for operating the table.
Explains patient orientation, lift, tilt, and other movement functions.
Details maximum patient and table weights for various configurations.
Covers essential safety checks, unpacking, and initial setup procedures.
Explains how to select functions, operate the table, and manage power.
Provides detailed steps for patient positioning and table adjustments.
Covers table locking, movement, and specialized driving functions.
Lists approved cleaning and disinfecting agents.
Step-by-step instructions for cleaning and disinfecting the table.
Lists common errors, their causes, and corrective actions.
Outlines recommended maintenance schedules and procedures.
Information on environmentally sound disposal of the product.
Details dimensions, weight, and load capacities of the operating table.
Covers electrical parameters, radio transmission, and electromagnetic compatibility.
Lists certifications and compliance standards for different regions.
Details CE, ETL, and other regional compliance marks.
Information regarding radio license for MBW operating table version.
General| Brand | baxter |
|---|---|
| Model | TruSystem 7000 |
| Category | Medical Equipment |
| Language | English |
To Next Page