Maintenance
84
7990044_030_10 – 2078511 – 2023-01-19
7 Maintenance
Do not carry out any maintenance work during surgery or while
the device is in use.
The maintenance intervals for the operating table are as follows:
– First maintenance in the 2nd year
– Second maintenance in the 4th year
– Annual maintenance from the 5th year onwards
The cladding protection is maintenance-free. In the event of
damage to the cladding protection, it must be replaced.
Product maintenance must be carried out by qualified service
technicians only. The contact details of service technicians can be
obtained from the Technical Customer Service at Baxter.
Baxter recommends concluding a maintenance agreement, so
that maintenance can be carried out promptly and reliably.
To ensure safe use of the operating table, Technical Customer
Service must be called immediately if there are leaks in the running
gear hydraulics system (loss of hydraulic fluid).
8Repair
Do not carry out any maintenance work during surgery or while
the device is in use.
The products must be repaired only by qualified service
technicians. The contact details of service technicians can be
obtained from the Technical Customer Service at Baxter.
To Next Page
Loading...
