Do you have a question about the baxter AK 98 and is the answer not in the manual?
Brand | baxter |
---|---|
Model | AK 98 |
Category | Medical Equipment |
Language | English |
Outlines the key learning goals for the Introduction module.
Identifies and illustrates external components related to the blood circuit.
Identifies and illustrates external components related to the dialysis fluid circuit.
Details the components and connection ports located on the rear of the machine.
Covers the alarm indication light and the function of operator panel hard buttons.
Describes the touchscreen display layout and the functions of various touch buttons.
Explains the display and adjustment of arterial/venous pressure areas and alarm limits.
Covers general menu navigation and setting parameters via keypad/selectpad.
Guides through machine power-on and the initial functional check process.
Details connecting concentrates, arterial, and venous blood lines.
Covers attaching the heparin syringe, manual, and assisted priming.
Explains setting treatment parameters and managing patient data via IT systems.
Covers pre-treatment checks, patient connection, and starting the treatment.
Details heparin bolus administration, BPM monitoring, and alarm settings.
Outlines procedures for ending treatment, rinse back, and machine aftercare.
Explains isolated UF activation, phases, deactivation, and types of profiling.
Covers Diascan parameters, measurement frequency, V value, targets, alarms, and history.
Addresses UF supervision alarms, halt button use, and handling air in the venous drip chamber.
Details power failure procedures, manual rinse back, and replacing BiCart cartridges or blood lines.
Covers lining, priming, terminology, and activating single needle mode.
Details starting and ending the single needle treatment, including deactivation.
Covers external cleaning, maintenance programs, disinfection schedules, and history.
Explains integration with water plants, WRO 300 H unit, and ultrafilter replacement.