What to do if the baxter iLED 7 surgical light does not come on?
If the Baxter surgical light doesn't turn on, first check if the external power supply is switched on. If not, switch it on. Also, verify that the power plug is properly plugged into the socket and the power supply unit is switched on. Lastly, check the local fuses and power supply to ensure there are no interruptions.
What to do if baxter iLED 7 Medical Equipment surgical light cannot be operated with the Mobile Control 7,9?
If you cannot operate the Baxter surgical light with the Mobile Control 7,9, it may be due to a fault in the WLAN connection. In this case, control the lighting intensity using the controls on the lamp head.
What causes uneven light field in Baxter Medical Equipment?
An uneven light field in Baxter Medical Equipment can occur if the lamp head is outside the working area. Make sure to position the lamp head in the appropriate working area. Also, switch the lamp head off and on again.
What to do if automated distance measurement does not work on Baxter Medical Equipment?
If the automated distance measurement isn't working and the ALC Plus indicator flashes, you can either deactivate the ALC Plus function using the Mobile Control 7,9, or through the secure mode. Alternatively, disconnect the power to the surgical light system to force a restart.
Why are there different color temperatures in the light field of Baxter Medical Equipment?
Different color temperatures in the light field may occur if the color temperature is only set on one lamp head. To resolve this, switch on the synchronization function.
Why does the lamp head move down or rise on baxter iLED 7?
If the lamp head moves down or rises, it indicates that the spring force in the spring arm is either too low or too high. To fix this, adjust the spring force.
What if the Baxter Medical Equipment surgical light still does not come on?
If the Baxter surgical light does not come on, and you've checked the power supply, plug, and fuses, the lamp head may have been switched off at the controls. Press the On/Off button on the controls.
General| Brand | baxter |
|---|---|
| Model | iLED 7 |
| Category | Medical Equipment |
| Language | English |
To Next Page
