Cleaning and disinfection
7990087_030_03 – 2080492 – 2023-01-19 71
regular cleaning. The regularity of cleaning depends on the
frequency of disinfection, but should be carried out at least once
a month.
Cleaning procedure
1. Disconnect the surgical light system from all power supply
terminals and secure it against being switched back on. See
Chapter 5.7.
2. Allow the device components to cool. Only clean or disinfect
the surgical light system when it is cold.
3. Remove the TruVidia Wireless camera as required. The
handle adapter #2065945 (Adaption Standard handle) or
#2066135 (Adaption disposable handle) must be attached to
the camera mount of the light head as a cover for the mount
and as a compensation weight.
4. Moisten a cloth with cleaning agent or disinfectant.
5. Clean the surgical light system with the damp but not wet
cloth.
6.2 Recommended disinfecting agents
Baxter recommends the following disinfecting agents for manual
use:
Comply with the hygiene guidelines of the product and the
instructions of the disinfectant manufacturer.
The disinfectant information, regarding application
concentrations and exposure time, must be followed.
The following disinfectants are permitted to disinfect the surfaces
of the support arm system (ceiling conduit, central axis, boom and
spring arms):
Manufacturer Product designation
B. Braun Melsungen AG Meliseptol
Miscellaneous 70% 2-propanol alcohol
Schülke & Mayr GmbH Perform 0.5%
Bode Chemie GmbH & Co. KG Dismozon pur 0.75%
Clorox Healthcare Hydrogen peroxide cleaner
disinfectant wipes
Kesla Pharma Wofasteril 0.5%
Preparation Active ingredient
Meliseptol Alcohols/aldehydes
Ethanol 60% Alcohols
Chlorhexidine 0.5% in
70% ethanol
Chlorine-based
Chlorine 250 ppm in 1 liter of
distilled water
Chlorine-based
Haemosol 1% in 1 liter of water Guanidine derivative
Dismozon pure Peroxide compounds
To Next Page
Loading...
Need help?
General
