Description
7990087_030_03 – 2080492 – 2023-01-19 33
– Lighting intensity
– Color temperature
–ALC Plus
– Shadow management
– Switching on and off
The selection of the function to be synchronized can be adjusted
by personnel trained in this work by Baxter. Adjustment of the
selection must take place individually for every Mobile Control 7,9
and each Wall Control Panel in the operating room.
4.6.7 Safe mode
With the Safe mode button, ALC Plus, shadow management and
radio communication via WLAN with the Mobile Control 7,9 or
Wall Control Panel, for example in the event of a fault, can be
interrupted. Pressing this button reboots the processing unit and
enables safe mode.
While the surgical light is in safe mode, the green status LED on the
operating panel is switched off.
In safe mode, the following light parameters are set:
– Color temperature 4500 K
– Medium light field width
– Lighting intensity = level 3 = 50%
–SLC = OFF
–Sync = OFF
– ALC Plus = OFF
– Shadow management = OFF
– WLAN = OFF
When safe mode is exited, the light starts with the factory or
customer-specific default settings.
4.6.8 Operating range
The operating range of the surgical light is determined by the
support arm system for the ceiling version. The operating range of
the mobile surgical light is determined by the spring arm and can
be placed at any position in the room due to its mobile stand foot.
Within the operating range, the surgical light can be placed in any
position and accurately pointed onto the wound field.
The surgical light is positioned in a sterile way using the sterilizable
handle [22] or in a non-sterile way using the comfort bracket [12],
the 1/4 bracket [13] or directly by grabbing the housing of the lamp
head [14].
The hinge joints of the support arm system have been equipped
with a friction brake. The friction brake transmits the friction from
the brake screw to the pin of the support arm component, thus
locking it in position. If the boom, the spring arm, the convenience
bracket, the 1/4 bracket or the light head do not remain securely