Use
38
7990087_030_03 – 2080492 – 2023-01-19
5Use
The surgical light has a multitude of functions that can be
ergonomically controlled using the control unit. The SLC Handle
Adapter can be operated in a sterile manner by using the
sterilizable handle. All other control units are used in a non-sterile
manner.
5.1 Safety instructions
When operating devices involved in the operation, always keep
visual contact with the operation situation.
Electrical hazards:
Danger of electric shock
• No patient applied parts of type BF or CF in accordance with
IEC 60601-1 may be directly connected to the surgical light
system.
• Do not insert objects into device openings.
• Disconnect the surgical light system from the mains power
supply before cleaning and service work.
Risk of explosion posed by anesthetics
The surgical light is not suitable for operation in explosive areas.
With a higher concentration of flammable mixtures, there is a risk
of ignition under certain conditions.
• The surgical light may not be used in rooms or areas in which
flammable mixtures of anesthetics with air or oxygen or N
2
O
(laughing gas) are used.
Risk to the patient if the power supply fails
• The power supply of the surgical light system may not be
interrupted.
Risk of charge balancing
• To avoid electrostatic discharge between metallic parts of the
device and the body of the patient, the user may not touch
parts of the surgical light system, the Mobile Control 7,9 and
the patient at the same time.
Optical radiation:
Risk due to laser beams
Prolonged visual contact with the laser beam might damage
eyesight.
• Do not look directly into the laser beam [A].
• Close or protect the patient's eyes during surgery. For example
with protective glasses with an optical density of at least 2, or
that are designed according to protection level 6 EN 169.
To Next Page
Loading...
Need help?
General
