Technical data
7990087_030_03 – 2080492 – 2023-01-19 81
12.3 Electromagnetic compatibility
Only operate the iLED 7 surgical light/Mobile Control 7,9/Wall Control Panel with the accessories
specified
• The iLED 7 System/Mobile Control 7,9/Wall Control Panel may only be operated with the accessories
indicated in the accompanying documentation. Operation with accessories, converters or cables
other than those specified in the accompanying paperwork can lead to increased EMC emissions or
reduced immunity of the iLED 7 System/Mobile Control 7,9/Wall Control Panel to interference and
therefore to incorrect operation. There are no specified precautions for maintaining basic safety in
relation to EMC over the expected operational service life.
• The properties of the iLED 7 System/Mobile Control 7,9/Wall Control Panel determined according to
emissions permit it to be used in the industrial sector and in hospitals (CISPR 11, Class A). When used
in domestic situations (for which CISPR 11 Class B is normally required), iLED 7 System/
Mobile Control 7,9/Wall Control Panel may not provide adequate radio equipment protection. Where
necessary, the user must take remedial measures such as the relocation or readjustment of the iLED 7
System/Mobile Control 7,9/Wall Control Panel.
Installing and operating the iLED 7 surgical light/Mobile Control 7,9/Wall Control Panel according to
the EMC instructions
• Medical electrical equipment is subject to particular safety measures in relation to EMC and must be
installed and operated in accordance with the EMC guidance set out in the accompanying
documentation.
Key performance features
The key feature of the iLED 7 surgical light system is the provision of illumination and limitation of the
energy over the operating area. Components such as the Wall Control Panel, Mobile Control 7,9 and
interface converter do not feature any key performance characteristics as per this standard.
Handle sleeve ring type short handle adapter
Diameter [A] 50.3 mm / 1.98 inch
Length [B] 128.5 mm / 5.06 inches
Handle sleeve ring type long handle adapter
Diameter [A] 50 mm / 1.97 inch
Length [B] 145 mm / 5.71 inches
To Next Page
Loading...
Need help?
General
