Technical data
7990044_030_10 – 2078511 – 2023-01-19 87
Loading of side rail Longitudinal axis: each 100 Nm /
each 73 ft·lb
Transverse axis: each 150 Nm /
each 110 ft·lb
Outer packaging Cardboard, wood, plastic bag and metal
parts: 80 kg / 176 lbs
Weight/load
Setting ranges
Lift – 55 cm (tolerance ±1 cm) /
2.17 inch (tolerance ±0.39 inch)
– Adjustment speed 2 cm/s (0.79 inch)
Longitudinal slide – 46 cm (tolerance ±1 cm) /
18.11 inch (tolerance ±0.39 inch)
– Head end 18 cm (tolerance ±1 cm) /
7.09 inch (tolerance ±0.39 inch)
– Foot end 28 cm (tolerance ±1 cm) /
11.02 inch (tolerance ±0.39 inch)
– Adjustment speed 3 cm/s (1.18 inch)
Trendelenburg/Reverse Trendelenburg
(inclination about the transverse axis)
45° / 45°
Tilt (inclination about the longitudinal axis) 30° to the left / 30° to the right
Leg section joints
(angles relative to the seat section)
90° upward / 105° downward
Back section joints
(angles relative to the seat section)
Operating table with two-part operating
tabletop:
90° upward / 45° downward
Operating table with one-part operating
tabletop:
90° upward / 90° downward
Electrical parameters
Internal power supply IPS, 2 rechargeable batteries,
40.7 V/4.8 Ah
External power supply 100 V–230 V~, 50 Hz/60 Hz
240 V~, 50 Hz
Power consumption Max. 700 VA
Operating mode S6 - Continuous operation with
intermittent load (DBAB)
2 min ON, 8 min OFF
Power plug Power cord as per country standards
Classification
Operating table protection classification I
Device with internal power supply, IPS
Level of protection against electrical shock
for the entire operating table
Type B applied part
Degree of protection from water
penetration
IPX4 (all-round splash protection)
To Next Page
Loading...
Need help?
General
