baxter OV500 Series User Manual

– 16 –
Using the Recipes
1. With the oven on, press the RECIPE UP or DOWN arrows to select the desired recipe number (1-
99). The TEMP, TIMER, STEAM, and FAN DELAY settings are displayed.
2. Conrm that the oven is at the set temperature.
3. Slowly open the doors.
4. Roll the rack into the oven so the end brackets channel onto the rack lifting carrier. (See Loading
Procedure.)
5. Press START, and then close and latch the door.
6. A beeper will sound after the TIMER times out. Press STOP to silence the beeper.
Recipe Hints
• The oven defaults to the Recipe 0 settings when rst turned on. Recipe 0 settings are as follows:
Temp = 375°F, Timer = 0, Steam Timer = 0, Delay Timer = 0, Recipe = 0.
• Any combination of bake settings can be manually entered for one-time custom baking operations.
These settings are not saved to the recipe memory.
• If any of the parameters are changed in a recipe before or during a bake cycle, the oven reverts to
a manual program (Recipe 0). If P20 (Restricted Mode) is set for 1 the settings can not be changed
during a bake cycle.
• The RECIPE UP and DOWN arrows have no e󰀨ect while the bake cycle is in progress. However,
if the TIMER has been stopped, either by pressing the STOP button or by opening the door, then
pressing the RECIPE UP and DOWN arrows will select a new recipe and cancel the baking cycle
that was in progress.
• When selecting recipes, the system will skip over unprogrammed numbers. For example, if Recipe
1 is displayed in the RECIPE window and no recipes are stored in 2, 3, and 4, then the system will
skip over 2, 3, and 4. Recipe 5 will be the next recipe displayed.

baxter OV500 Series Specifications

General

Brand	baxter
Model	OV500 Series
Category	Oven
Language	English