baxter OV500 Series User Manual

– 22 –
TROUBLESHOOTING
BURNERS WILL NOT LIGHT ON GAS OVEN
1. Check that the loading door is shut and the door switch is actuated.
2. Press the OFF button to turn the oven o󰀨 and wait 5 minutes.
3. Make sure the gas shuto󰀨 valve and gas valve are in the ON position.
4. Press the ON button to turn the oven back on.
If the above suggestions do not remedy the problem, contact a Baxter authorized service o󰀩ce.
ALARMS AND DISPLAY MESSAGES
Alarm or Message Cause Action
Temperature display changes
between a number and ‘COOL’.
Cool Down mode
is active.
To return to normal mode, close oven door or press any
button.
Display is ashing with no
beeping, while oven is in a timed
bake cycle and is calling for heat.
Temperature
recovery alert.
Open oven door and close to reset heat control. If
unit does not begin heating, contact your local Baxter
authorized service o󰀩ce.
Display shows ‘SHdn’. Safety Alarm has
disabled oven.
TURN OFF ALL POWER AND GAS TO THE OVEN.
Contact your local Baxter authorized service o󰀩ce.
Control beeps continuously. Rack Rotation
alert.
Check that rack is rotating; check for pans that may be
protruding from rack. If problem persists contact your
local Baxter authorized service o󰀩ce.
Controls beeps rapidly (faster
beep than Baker Timer).
Temperature alert
for Kosher Mode.
Turn VENT o󰀨, if activated. Gas ovens: check that
burner is ring. If not ring, briey open door and close
to reset temperature control.
Display shows ‘LOC OUT’. Oven in Kosher
Lock-Out Mode.
Contact your local Baxter authorized service o󰀩ce.
OTHER TROUBLESHOOTING TOPICS
Condition Cause Action
Oven circulation fan is running but
oven is turned o󰀨.
Oven is in Cooling mode. Close oven door to cancel cooling
mode. If door was not open, contact
your local Baxter authorized service
o󰀩ce.
STEAM TIME cannot be set above
10 seconds, and time increments
by 1-second.
Oven is in Food Service or Pulse
steam mode.
See Food Service Mode
instructions to return oven to
Bakery mode.
Rack does not lift and rotate. Bake time has not been entered
in timer and/or timer has not been
started.
Enter time in TIMER and press
START. If problem persists, contact
your local Baxter authorized service
o󰀩ce.

baxter OV500 Series Specifications

General

Brand	baxter
Model	OV500 Series
Category	Oven
Language	English