7
Route the power cord through the hole in the
back of cabinet, and plug into the line filter
inside the game.
WILLY CRASH GAME SETUP
Unlock and remove the back door using a H95 key.
Replace the back door.
Peel the protective plastic film from the marquee
artwork.
Using a ladder, position the marquee artwork on top of the
game and secure using 8 of the black # 2 square drive screws
from the hardware kit. (4 per side)
The game is now set up and ready for play!
Enter menu to adjust settings to your location specific price per play
and ticket payout.
Power on game:
Open the front door and turn on the rocker switch on the power strip.
To Next Page
Loading...
Need help?
General
