26
REV 0.9.5
through ShareMyCook, it will not start right away. It will first synchronize with
the device and then begin to count down. The timer on this page only shows
the timer that is running on the device. If your device gets disconnected, the
timer will not update. In addition, the timer only updates when it receives a
new update from the CyberQ Cloud, which is usually every 15-30 seconds. It
will not count down each second).
System Setup Page: On this page you can set several of the devices
system settings:
1. Temperature Units: you can choose if you want your device
(and in HotSpot mode) to display units in Celsius or Fahrenheit.
IMPORTANT: this does not change how the temperatures are dis-
played on ShareMyCook. (If you wish to change the way the tem-
perature units are displayed on ShareMyCook, go to the ‘Account’
drop down and select ‘My Profile’, and change your temperature
unit preference there.)
2. Menu Scrolling: the LCD screen of our device can scroll through
your temperatures. By checking this box, the LCD screen will scroll.
3. LCD Backlight: you can increase the back panel brightness of the
LCD on your device. This value can be 1-100. If using the device set-
ting in direct bright sunlight, it can be helpful to change this setting
to improve readability. (Note: if you set this too low, it can become
very difficult to read your display, so we do not recommend setting
this too low.)
4. LCD Contract: this value can be 1-100, and will adjust the contrast
on your LCD screen. This can help to improve readability when using
the device in direct sunlight. (Note: if you set this too high or low, it
can become very difficult to read your display.)
5. Alarm Beeps: when your CyberQ Cloud has an alarm condition, it
will make an audible alert. This setting will determine how many
times it beeps. If you wish to disable the audible alarm, set this value
to 0.
6. Factory Restore: this will erase ALL your custom settings and
return your device back to factory default settings. Your device will
lose connection to the internet including ShareMyCook.com until
it is reconfigured. We recommend only using this option if really
necessary since you will have to re-register your CyberQ Cloud again
on ShareMyCook. (If you give your CyberQ Cloud away to someone
else, we do recommend a factory reset). Note: A factory reset also
requires a reboot of your device to take effect.
7. Reset CPU (Reboot): this will restart your device and you will lose
connection to it for several minutes. You may not regain a connec-
tion if you changed your WIFI settings. If you make changes to your
WIFI settings a reboot is required.
To Next Page
Loading...
