Need help?Do you have a question about the BBQ Guru UltraQ and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Display | LCD |
| Number of Probes | 2 |
| App Compatibility | Yes (iOS and Android) |
| Probe Ports | 2 |
| Meat Probe Included | Yes |
| Pit Probe Included | Yes |
| Temperature Range | 32°F to 500°F |
| Control Type | PID Control |
| Power Supply | AC Adapter |
Keep barbecue away from combustibles. Use caution with embers and keep fire extinguisher nearby.
Do not place the barbecue on combustible surfaces to avoid fire hazards.
Never extinguish a grease fire with water. Close grill and air supply.
High voltage unit requires 2400V AC. Keep away from water; do not touch if wet or damaged.
Modifying or opening the control unit voids the warranty and may cause unit failure.
All returns require original receipt, packaging, and items must be resalable. Certain items are not accepted for return.
UltraQ controls and fans have a 2-year limited warranty against defects in workmanship and materials.
Warranty void if product shows tampering, moisture, heat, corrosion, or misuse.
BBQ Guru is not liable for any damage or loss arising from installation or use of the product.
Connects to Bluetooth-enabled devices for direct temperature control via the BBQ Guru app.
Patent-pending LED Q-light ring shows grill and fan status in real time.
Full-time adaptive control algorithm learns the grill for better stability and accuracy.
Cooking chamber sensor controls grill and regulates airflow to reach preset food sensor temperature.
Detects an open lid to minimize temperature fluctuations.
Lowers grill temperature to prevent 'overcooking'.
Application range from 0 to 180 degrees Celsius.
5-in-1 magnetic controller mount allows viewing from any angle.
Operates with 110-240V AC worldwide or 12V DC for automotive use.
Connects to home network for remote monitoring and control via internet.
Precision stainless steel thermocouple material with moisture/smoke resistant Teflon insulation up to 180 degrees.
Avoid kinking wires, direct flame contact. Wash probes by hand. Probes are user-replaceable.
Insert sensors completely until they snap. Check LED indicator if probe is not lighting up.
Place cooking chamber sensor near cooking area for accurate temperature control.
Route probe cables through exhaust cap to avoid damage from concentrated heat.
With proper care, probes have a functional expectancy of 2 to 3 years.
Uses variable flow rate to modify oxygen supply to fire and maintain set temperature.
Fans have an adjustable damper and aluminium nozzle for airflow control.
Close damper to extinguish embers. Adjust for wind. Open fully for quick start, half for low and slow.
Place UltraQ in a stable position in the holder. Controller can be rotated. Protect from weather.
Additional bracket for side table attachment included with Monolith grill edition.
Assembly requires Phillips screw, hex nut, upper control bracket, hex screw, and twist nut.
Secure lower platform to upper bracket, press rubber feet, engage controller, adjust angle, tighten nut.
Attach sheet metal holder, attach upper bracket, engage controller, adjust angle, tighten nut.
Connect cooking chamber sensor, then food probe and fan. Check LEDs for probe connection.
Ensure plugs are locked. If LED doesn't light, probe may be faulty.
Outer ring lights up in different ways to indicate grill status: solid blue, solid red, pulsing red.
Outer ring indicates grill status relative to set temperature. Range is 0°C to set temperature.
Shows fan status, and warnings for no pit probe or pit temperature deviation.
Outer ring pulses red when above set temp. Alarm deviation is adjustable.
UltraQ automatically restarts and continues control after power interruption.
Press and hold the left button for 2 seconds to reset the controller to factory settings.
Press and hold SELECT for 2s to flash display. Use UP/DOWN to adjust temperature by 1° or 5° steps.
Press SELECT to jump to food probes. Press/hold SELECT for 2s, use UP/DOWN to set desired temperature.
Press and hold DOWN for 2s to toggle scanning of all temperatures at 2-second intervals.
Outer ring indicates current chamber status. Bulge colour matches probe display.
Displays '---' if no probe is connected to a socket, indicating a missing probe.
Blue LED flashes slowly when not connected. Solid blue when paired. Check device Bluetooth settings.
If pairing fails, an app notification and prompt to try again will appear.
Outer ring indicates temperature status: solid blue (rising), solid red (within range), pulsing red (above range).
Displays '---' and flashes outer ring if no cooking chamber probe is connected.
Displays 'HI', pulses red, and sounds buzzer when cooking chamber temperature is above target range.
Alarms sound when temperature is above or at set point. Press any key to clear. See Mobile App section for details.
Download 'BBQ Guru' app from store. Follow instructions to install and name your controller.
Touch temperature values on main screen to set cooking chamber and food temperatures. Switch between °C and °F.
Minimizes fan power when lid is open to prevent overheating. Can be deactivated in settings.
Activates to prevent overcooking by lowering chamber temp. Requires chamber temp > 1°C above food temp.
Set alarms for grill temperature changes. Alarm deviation is adjustable in user settings.
Learns grill operation for better control. Requires stable temperature with lid closed.
Offers 3 preset adaptive algorithms for different grill types. Option 4 allows customisation.
Set countdown timer with options for 'No action', 'Hold' temperature, or 'Alarm' notification.
Access more settings via app menu: turn off LEDs, audible alarms, or enter scan mode.
Customize alarm signal and beep duration settings for better identification.
Log in or create a Share My Cook account. Follow instructions to select Wi-Fi network and enter password.
Monitor and control UltraQ from any device with internet. Enables social sharing and data storage.
Check for app updates, reinstall if necessary, or contact customer service with device details.
Ensure Bluetooth is active. Stay within 15m range. Contact support if issue persists.
Indicates loss of Bluetooth signal. Verify LED status. Re-establish connection within range.
Check grill seal. Activate Open Lid Detection. Restart controller if fan runs continuously.
Normal variation exists. Check probe placement, seal, or for damage. Replace faulty probes.
Reddish bumps on wire indicate melted insulation from flame exposure. Replace probe.
Test probes in boiling water. Check probe insertion depth and bone proximity for accurate readings.
Ensure probe is fully inserted. If still not detected, probe may be broken.
BBQ Guru is powered by Monolith Grill GmbH. Contact details and address provided.
Specifies operating temperature, humidity, and non-condensing height limits for the device.
Details temperature accuracy at different environmental conditions.
Provides FCC ID and Wi-Fi certification details. Warns of potential interference from other 2.4 GHz devices.
To Next Page