To Next PageTo Next Page
Need help?Do you have a question about the BD Phoenix M50 System and is the answer not in the manual?
General| Brand | BD |
|---|---|
| Model | Phoenix M50 System |
| Category | Laboratory Equipment |
| Language | English |
Contains information for all QC or test panels whose status became Complete during the selected time period.
Provides information for a specified accession number.
Lists all panels in the instrument's database that have a Needs Attention flag set that have not been ignored.
Lists the panels contained in stations 1-25 for each tier.
Lists all Test Strain Organisms that have completed testing and all biochemical and/or antimicrobial MIC results.
Provides information on quality control testing of all panel types.
Lists the status of the instrument at the time the report is generated, along with a maintenance checklist.
Lists the antimicrobial breakpoints of the Interpretation Rule Set defined as the default Rule Set.
Lists each BDXpert rule number and the text describing the rule, whether each rule is enabled/disabled.
Displays all Organism Names that exist in the BD Phoenix™ database.
Displays all antimicrobials and the BD LIS codes for all antimicrobials.
Contains all information for a panel sequence number that exists in the BD Phoenix™ database.
Contains all the panels eligible for finalization and their status at the time the report was requested.
Prints a Lab Reports for all panels in the instrument that have partial or complete results.
Prints a listing of differences between old breakpoints and new ones after a BD Phoenix™ Update Data operation.
Contains information on the most recent QC test for each of the required strains for a panel lot.
Contains information on all tests for a strain for the current instrument, up to 200 tests.
Lists all the panel records for any panel lot number in the current instrument.
Lists all the defined panel lots in the current instrument, and provides statistical and reference information.
