Becker BXP6401-1 Series - Software; System Approvals; Equipment; Accessories

4. Software
l
The transponder BPX6401-X-(XX) is controlled by a microcontroller in the control
head and the core unit. The software criticality is determined to be Level C in
accordance with EUROCAE/RTCA document ED12B/DO-178B.
5. System approvals
EASA.21O.322 ETSO-2C112a
FAA TSO-C112
6.
Equipment
Destination Description Article-No.:
BXP6401-1-(01) Transponder,
Level 2, class 1
Article-No. 0588.687-915
BXP6401-2-(01) Transponder,
Level 2, class 2
Article-No. 0588.709-915
AM6400-1-(01) Address Module Article-No. 0572.942-915
BE6400-01-(01) Blind Encoder Article-No. 0592.137-915
7. Accessories
AMP6400-1 Address Module programmer Article-No. 0584.843-954
kit (software and cable),
parallel interface
AMP6400-2 Address Module programmer Article-No. 0604.054-954
kit (software, adapter and cable),
USB interface
CK4401-C Standard connector kit Article-No. 0552.798-954
1 D-Sub plug, 25-pin
(crimp version)
CK4401-S Standard connector kit Article-No. 0552.801-954
1 D-Sub plug, 25-pin
(soldering version)
CK6400-C Extended connector kit Article-No. 0586.064-954
1 D-Sub plug, 25-pin
1 D-Sub jack, 25-pin
(crimp version)
CK6400-S Extended connector kit Article-No. 0586.072-954
1 D-Sub plug, 25-pin
1 D-Sub jack, 25-pin
(soldering version)
TNC coaxial connector for RG-58C/U Article-No. 0551.694-277
(crimp version)
TNC coaxial connector for RG-223/U Article-No. 0551.732-277
(crimp version)
Page 1-7
34-50-08 September 2011
INSTALLATION AND OPERATION BXP6401-X-(XX)