Parameterization and Commissioning
BK52x0 and LC520034 Version: 2.0.0
instance, the consistency must be extended. The different bus systems guarantee consistency up to the
required length. Correct transfer of the consistent data from the bus system master to the controller is
important. The corresponding manual for the bus system will provide a detailed description of the correct
procedure, in particular the description of the master interfaces used. Those chapters of this manual that
deal with the fieldbus refer to the most widespread interfaces.
Complex signal processing
All the byte-oriented signal channels such as RS232, RS485 or incremental encoders operate to some
extent with byte lengths of more than two. Apart from the difference in length, they are always handled
similarly to the analog signals.
To Next Page
Loading...
Need help?
General
