EasyManua.ls Logo

Beckhoff EP1957-0022 - User Manual

Beckhoff EP1957-0022
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Instructions | EN
EP1957-0022 and EP1957-2222
TwinSAFE EtherCAT Box with 8 fail-safe inputs and 4 fail-safe outputs
2023-03-07 | Version: 2.0.0

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Beckhoff EP1957-0022 and is the answer not in the manual?

Beckhoff EP1957-0022 Specifications

General IconGeneral
BrandBeckhoff
ModelEP1957-0022
CategoryPortable Generator
LanguageEnglish

Summary

Notes on Documentation

Disclaimer and Legal Information

Covers disclaimers, trademarks, patents, liability, and copyright.

Documentation and Product Status

Details documentation issue status and product version history.

Staff Qualification and Safety Instructions

Outlines staff qualifications and provides safety/symbol explanations.

Beckhoff Support and Service

Lists contact information for technical support, training, and service.

For Your Safety

Duty of Care and Safety Signs

Defines operator duties and explains safety pictograms on the product.

General Safety Instructions

Provides essential safety guidelines for before, during, and after operation.

System Description

EtherCAT Box Modules Overview

Describes EtherCAT Box modules and their integration into the EtherCAT system.

Product Description

EP1957-0022 and EP1957-2222 Overview

Introduces the EP1957 EtherCAT Box with its key specifications.

Intended Use and System Limits

Specifies intended applications and outlines critical system limitations and warnings.

Technical Data

Lists detailed technical specifications of the EP1957.

Safety Parameters and Certifications

Details safety parameters, certifications, and standards compliance.

Safe Inputs and Outputs

Explains the functionality and design of safe input and output modules.

Physical Dimensions

Provides the physical dimensions of the EtherCAT Box.

Operation

Environmental Conditions

Specifies the required environmental conditions for product operation and storage.

Installation and Fixing

Provides instructions for physically mounting, fixing, and securing the modules.

Module Connection and Wiring

Details EtherCAT, power, signal connections, and wiring best practices.

Temperature and Signal Cable Management

Covers temperature measurement and guidelines for signal cable routing.

TwinCAT Configuration

Guides on configuring the EtherCAT Box using TwinCAT, including addressing and logic.

Reaction Times

Explains typical and worst-case system reaction times from sensor to actuator.

Diagnosis and Troubleshooting

Describes product diagnosis using LEDs, error codes, and flash displays.

Service Life

Service Life and Serial Number Information

Details the product's service life and unique serial number.

Maintenance and Cleaning

Cleaning Procedures

Provides instructions for maintenance and cleaning of the product.

Decommissioning

Disposal Guidelines

Covers proper disposal methods and regulations.

Returning to Vendor

Instructions for returning used devices for professional disposal.

Appendix

IP Protection Classes

Explains the IP code protection classes used for the product.

Product Volatility

Discusses product component volatility and data security considerations.

Certificate Focus and Details

Highlights the importance of EC type examination certificates for TwinSAFE components.

EC Declaration of Conformity

Presents the EC Declaration of Conformity for the product.